Key Aspects While Air Conditioning Installation

Key Aspects While Air Conditioning Installation

Air conditioning installation is a task that many people would take it as a do it yourself project but let’s not take it as overambitious expectation from oneself. You will need to know the pros and cons of the project in hand, to get both successful and efficient in it. In this article we will look at a structured method that one should follow to complete an air conditioning installation.

To begin with, take a good look at the user manual and devote some time to read it carefully. Equipment has enough instructions provided by the manufacturer to learn some intricate details and settings of the equipment that may need to be followed during air conditioning installation. Watch out for the information pertaining to self-installation; some manufacturers specify warranty void if it has not been installed by professionals.

Installing the Indoor and Outdoor Units

Air Conditioning Installation

There are two units to a split air conditioner and while you install indoor panel with the help of hooks or bolts in a place that is appropriate, mostly the indoor unit is placed high enough to cool from top down. Ensure that the distance between the two units is not too much, this is important since both the units are connected with copper pipes in most cases. Which may bring these pipes in contact with external environmental conditions, hence reducing the efficiency of the machines.

#1. Indoor unit – While working on the indoor unit, you also need to keep in mind that appropriate electrical fittings are required, which include heavy duty wire, switches and a full-fledged switch board. Ensure that all wires are concealed and are not running bare; you could make use of conduits that conceal the wire and can easily bend with the rest of the construction. If you have no experience working with cooper pipes, it may be best to call air conditioning service professional to help you complete the job. There is a need to bend cooper pipes that extend from the outdoor unit to the indoor one. These have to be handled with utmost care and if they do crack, then there is a chance for leakage. This damage is not only time consuming to fix, but will be an additional expense to borne too.

#2. The outdoor unit– It takes a different approach; you would like to place this unit which holds the compressor and the condenser on a flat area that can hold weight. The outdoor unit is generally heavy about 40 to 50 kilograms in weight, note that the weight may vary from one manufacturer to another. Some would also make use of metal frames that can easily be fixed to the exterior wall of a building and then suspend the outdoor unit to lie on these frames, this may be an option if there is a platform available to place the heavy outdoor unit.

While placing the outdoor unit, ensure that it is not too close to the exterior wall, so that the vibrations from the equipment do not reverberate on the wall and cause unnecessary noise and disturbance. In air conditioning installation, pay attention to the drainage pipe that extends out of the indoor unit, the water from the outlet pipe should not be dripping on to the external unit, place a pipe that may allow the water to flow freely on the ground.

If in Doubt, get a Contractor

After going through the above points, if you feel that this not a job for a weekend do it yourself, you should consider hiring a contractor to complete the air conditioning installation project. Since this project is both important and critical, you will benefit from hiring a reputed professional.

About homeadmin

Leave a Reply

Your email address will not be published. Required fields are marked *