Top Materials to Use for the Best Finished Patio Doors

Top Materials to Use for the Best Finished Patio Doors

Nowadays manufacturing companies manufacture patio doors and sliders from a variety of materials. For instance, nowadays a wood door is not necessarily made up of only wood. Some wood doors have steel interiors; whereas, some steel doors have wood exteriors. Similarly, a fibreglass or steel door may have a wood frame or some sliders are even made up of aluminium. However, there exist hardly any door which have an energy-efficient core of foam insulation. For more information about the materials used for doors, read the article:

Wood Patio Doors

Wood is the most common material used for patio doors because of its natural beauty. Moreover, the scratches on wooden doors are relatively easy to repair. Because wood is vulnerable to weather damage so, surely give a durable finish of paint to your wooden doors. Also, re-stain your wooden doors every few years to make them look new. You can even buy either factory primed, pre-painted in standard colours or painted with custom colours wood doors.

However, so far it is a concern of manufacturing, the manufacturers use both hardwoods and softwoods. Hardwood is the most common when you desire a natural finish. Various doors have various advantages and disadvantages. For instance, some are durable in weather; whereas, some are better for staining. Out of all the species, below are the characteristics of a few widespread species:


Poplar is an ideal choice for the best-finished patio doors because it thoroughly accepts paints and stains. Also, it is typically inexpensive.

Red Oak

Red oak because of excellent water resistance is the most popular and abundant of the hardwoods. Also, this variety of hardwood takes more abuse due to its courser grain.


Ash hardwood is strong and durable. Also, this wood stains thoroughly. Generally, this wood is light in colour and slightly harder than red oak. Therefore, because of its strength and durability, ash hardwood is commonly used in the making of tools, furniture and frames.


Hickory is the toughest, heaviest, and hardest of the hardwoods which looks the best in a rustic application such as a log cabin.

White Oak

Carpenters consider white oak the best all-around wood because it allows little or no water to penetrate its surface and offers excellent wear resistance. Also, this wood is highly stainable and commonly used on boats and in the making of wine and whiskey barrels.


Cherry is a hard and sturdy wood which resists warping. This wood darkens with light exposure and age. Also, this wood stains thoroughly. Manufacturers use cherry in the making of furniture, cabinetry, and doors.


Like its name, walnut is a robust and dark hardwood which sometimes has blonde streaks. Walnut stains to an exceptional finish. Therefore, this wood stands second to cherry for making furniture, cabinetry, and doors.


Mahogany is a tropical and durable wood which warp rarely. This wood is reddish-brown and has excellent finishing qualities.

Fiberglass Composite Doors

This human-made material has a clean and modern appeal. Also, you can paint fibreglass composite doors to give them a more furnished look. Due to the synthetic nature of fibreglass, fibreglass doors are durable and never peel, swell, or warp. Additionally, fibreglass is moderately priced, dent resistant, and energy efficient material which requires little maintenance. However, this material can crack under severe impact. Therefore, be careful while installing such doors.

Vinyl Clad Doors

On combining the beauty of natural wood indoors and the durability of vinyl surfaces outside, you will get the most popular low-maintenance option vinyl-clad doors. Therefore, multiple homeowners preferably install vinyl-clad doors for the beautification of their house.

Aluminium Clad Doors

If you combine the best of two worlds which is the natural beauty of wood doors and the durability of aluminium surfaces, then you will get a popular option in the form of clad doors. However, the outside surfaces of aluminium cladding get prefinished with a factory coating before manufacturers deliver them to their customers.

Steel Doors

Steel doors are made up of heavy-gauge galvanised steel which manufacturers apply over a core of rigid foam. The manufacturers typically coat the surfaces of steel doors with a polymer or vinyl and emboss them with wood-grain. However, this material can scratch and needs repainting on a regular basis to prevent it from rust. Though steel offers low maintenance and strength, dents in steel are difficult to repair. However, because of their foam cores, most steel doors provide excellent energy efficiency.

Aluminium Doors

Solid aluminium used for the frames and tracks of some sliding doors, is lightweight and durable. If you give aluminium doors an anodised finish, then it will resist corrosion resulting in a rust-free surface. However, like steel, aluminium doors also dent easily.

Vinyl Doors

Vinyl is thermal resistant and a cost-effective solution which does not show scratches. Manufacturers commonly use this material for patio doors. The vinyl doors can either swing, slide or fold depending upon your choice.

Glass Doors

Generally, glass is the most common material used in windows and doors. Therefore, nowadays in addition to ordinary clear glass, most manufacturers offer a variety of high-performance and decorative options. Also, there exist glass doors and windows which provide impact-resistance for enhanced protection from hurricanes along with higher resistance to break-ins and other threats.

Author Bio: Samiel Hughes is the content creator of ‘Paradise Exteriors’ which provides the best quality of hurricane windows and doors in South Florida. The professionals at Paradise Exteriors focus on delivering top-notch window and door services in replacement windows, hurricane windows, impact windows, and impact entry and patio doors to protect your home and making it look great at the same time.

About homeadmin

Leave a Reply

Your email address will not be published. Required fields are marked *